Green Spray Technology Co., LTD.-News

News

Current position：Home >> News

[推荐]How to choose the nozzle and form a comp
2013-07-02
The selection and matching of nozzle is on the foundation of combustion and non -combustion equipment because reasonable combustion equipment should satisfy the burning ,heating and heat -transfer
The use of desulfurization nozzle
2013-06-20
Desulfurization nozzle using the basic principle is to use dusting spray will wet the dust particles to increase the proportion of particles and then with the atmosphere or gas, respectively. Summa
Features high-pressure water mist nozzle
2013-06-20
Over the years, along with everyone getting to know about the high-pressure water mist, making use of high-pressure water mist nozzles are increasingly being used in a number of works or fire s
Where some of the nozzles may desulphuri
2013-06-20
In the past, in most desulfurization project, the most important is for the desulfurization nozzle: spiral nozzle Now many works slowly swirl nozzle with more, and there are eccentric C type nozz
Water spray system selection and applica
2013-06-20
Automatic sprinkler system can extinguish Class A fires and a small Class B fires. However, for most Class B fire sprinkler systems can not do anything, so that the water spray system was born.
Nozzle maintenance
2013-06-20
Cause nozzle failure reasons: 1, erosion. When the high velocity of the liquid through the nozzle hole of the metal surface, it will generate the nozzle hole erosion, resulting in lower nozzle
Nozzle physical characteristics
2013-06-20
1 spray efficiency The pressure nozzle is converted to kinetic energy of a body, the efficiency of the spray nozzle must be as kinetic energy of the liquid in the interior of the nozzle i
Spray nozzles theory
2013-06-20
Flow The spray nozzle flows of different pressures, which increases with increasing spray pressure. Generally speaking, the relationship between flow and pressure as follows: Density De
Nozzle or nozzles require constant innov
2013-06-20
Nozzle or nozzles nozzles are kept the same needs and industrial innovation, which is an old saying, but today I must mention that it is no matter what the product needs to innovation, so as to
How to detect failure problems nozzle
2013-06-20
The role of the nozzle initially minor problem, and therefore is often overlooked. With the change of the throat, the gradual change of spray characteristics obvious and can be monitored. Particl

Home 1 Last